Weekly Checks – Clutch Master
Clutch System – Clutch Master
PURPOSE
A clutch master cylinder is designed to hold a reservoir of brake fluid and apply pressure down a line to the slave cylinder. The master cylinder must hold residue pressure making it a completely sealed unit away from air allowing this hydraulic applicator ready at all times with the slightest pedal push.
THINGS TO LOOK FOR
The reservoir must never drop in level. The clutch pedal should never require pumping or have excessive play. This is an indication that there is a leak or air is leaking into the system. This requires attention ASAP.
IS IT EXPENSIVE TO REPAIR?
Most clutch master cylinders cost from $50.00-$200.00. Shop around for a good price. Brake master cylinders are repairable but because most brake master cylinders are made of alloy, they may an irreparable ball, making it cheaper and quicker to replace the cylinder rather than repairing it. Remember to bleed the system after fitting
TEMPORARY REPAIR AND LONG TERM REPLACEMENT
If the pedal goes to the floor with no resistance and the clutch master reservoir is empty, try topping it up and pump the pedal slowly and this should self bleed. At the same time check that the slave is not pouring out fluid. If it does then the only thing to do is get a tow truck.
Join the forum discussion on this post - (1) Posts